Having trouble using hardware setup program on your Toshiba computer! Just take a short trip with us; we will guide you in the effective use of this program. Likewise many other computers, Toshiba also comprise hardware configuration program also known as setup which permits you to enter your computer’s basic input/output system. This program comprises all the information about each component of your computer. Using this, you can change your computer’s power setting, memory allocation and even the turns by which the boot devices are accessed. For this, you must enter this program immediately after your computer turns on or restart. Once window starts loading, you are not able to enter the BIOS.
- Switch off your Toshiba laptop if it is currently running, let it leave in the same state for 5 seconds and then again press the power button to start the computer
- Be quick while your computer boots up, press “F2” as soon as the Toshiba logo appears on the screen. If you delay pressing this button then you have to repeat this process again.
- You may need to press the “F2” key repeatedly until the basic input /output system appears on the screen. If it appears then use the arrow key to move left, right, up, and down.
- Now choose the option according to your purpose and then continue.
These are the steps to enter the BIOS our experts have explained you, but there are many other purposes to use this setup program. Pressing the wrong key or glitches with this program can lead you to another issue. Therefore it is better to get it done under the observation of the experts. So feel free to contact our experts via toll-free Toshiba Support Australia 1-800-875-256. They will not only assist you with this particular issue but also provide you with the well-described solution in some other similar issue.
